Handlebar Grips/Tape

- High quality vinyl tape for securing handlebar tape and other shop uses

MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

Pretty much everyone has lost the plugs from drop bar bikes. It's obnoxious. These plugs, however, have two elastomers that expand when tightened, keeping them secure within the bar. - Fit bars with 18-20mm inner diameters - Installs with a 3mm hex wrench - Outer diameter of plug measures: 25mm

The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 120mm - Shape: Round - Weight: 84g

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.

Give your bike some personality and a comfy ride with Profile Bar Wrap. This beautiful handlebar tape will definitely make you stand out in a crowd. And, with extra stretch and length, it's easy to wrap, too!

Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge

- Embossed carbon-look weave pattern and self-adhesive backing - Includes carbon look, black plastic end plugs and finishing strips

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

The handlebar grips on your bike are one of the few contact points that keep you connected to your bike. The elegant ergonomic curves and rib pattern texture keep your hands happy all day long by providing anti-slip, all day vibration dampening comfort. Whether you're riding a mountain bike, commuter, beach cruiser, bmx or e-bike, check out the natural comfort and style that these handsome grips add to your ride. The Dura Cork version of Planet Bike's Happy Hands Handlebar lock-on grips feature a durable natural cork and rubber composite construction that will keep your hands comfortable and in control no matter what kind of riding you are doing. - Ergonomic shape and durable cork/rubber construction give optimum anti-slip control, even on demanding terrain or in wet conditions - Soft & ribbed patterned texture provide superior vibration dampening and increase comfort by reducing hand fatigue on long rides - They feel great with both gloves and bare hands - Designed to fit any standard straight bicycle handlebar with an outer diameter between 20-22mm - Installation is easy with a single lock-on alloy clamping collar that keeps grips in place while you ride. Hex wrench for installation is included - Size: 130mm length, 31.75mm diameter - Weight: 102 grams

In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair

- Special Micro-cellular structured tape material with perforations for breathability, comfort, and less weight - High Elastic modulus Provides vibration-damping and comfort - White printed logo throughout tape length and self-adhesive backing - Plastic end plugs and finishing strips included

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

Siliconez are the grip of choice for top world cup XC racers looking for both weight savings and performance. Feeling is believing with Supacaz’s patented memory foam attributes that mold to your hand providing consistent grip in any condition. The shock-absorbing qualities reduce fatigue of not only hands but the entire upper body. - Material: Silicone Foam - Diameter: 32mm(sl), 34mm(xl), 36mm (xxl) - Length: 130mm - UV resistant - Latex-free

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

- Special microcellular structured tape material with perforations for breathability, comfort, and less weight (10g lighter than standard tape) - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips

Flow, chunk, ruts, drops, jumps, berms! The trail grip can handle it all. Featuring a unique diagonal micro-ridge pattern, super-soft and grippy compound, we spared no expense to make these the grip to grip. For security, and width customization, we added a sleek single locking clamp so you can have the confidence to choose your width, clamp these grips down and give'er. If that wasn't enough pampering for dem paws, we've got two widths for the choosing. - Diagonal micro-ridge pattern for the ultimate grip and feel. - Small/Medium diameter: 30mm - Large/X-Large diameter: 32mm - Single locking clamp with built-in end cap for security, safety, and width customization. - Soft and oh-so-grippy compound creates supreme tackiness and vibration damping.

Oury single compound grips. Simple & classic. - Soft grips with raised blocks - Flange: No - Lock On: No - Grip Shift Specific: No - Length: 135mm - Shape: Round - Weight: 122g

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Microtex is the thinnest option for pin-sharping handling and control. Its tacky finish aids a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Microtex construction 2mm thick - Tacky touch

Extensive material research and design testing, plus expert and carefully detailed craftsmanship, have produced the ultimate standard in grip comfort and beauty. Anti-vibration large pad design eliminates numbness and slipping for any hand size. Made in the U.S.A. - Compatible with MTB, BMX, ATV, PWC - 5" long (127 mm) - 7/8" I.D. (22.25 mm) - 1.26" O.D. (32 mm) - 5 ounces (141.5 grams)

- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape

Packed with the performance you have come to expect from the Yeti name, the Hardcore grips are a great choice for riders looking for a soft compound grip with excellent control. - Large, raised Yeti logo pad cushions your palms - Smaller angled Yeti logos offer traction for your fingers - Constructed of our proptietary soft compound material for great feel - Dual-ply design for better bar adhesion and longer grip life - Includes Push-In Bar Ends

Give your bike some personality and a comfy ride with Profile Karbon Bar Wrap. The simulated carbon look adds some style to your ride. With extra stretch and length, it's easy to install, too. Plus, it comes with Profile's Karbon plugs.

The Team grip was designed by our team riders who wanted a wider, more comfortable grip for big bars and brakeless riders. Vortex PC Bar Plugz included. - Designed by Stolen Team riders - Includes color matched Vortex PC Bar Plugz - Length: 165mm - Diameter: 31mm - Weight: 4.3-ounces per pair

- Special microcellular structured tape material is waterproof and conforms to bar shapes - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

Customize your handlebars with new end plugs. Compatible with MTB and Road, carbon and aluminum.