Fenders

The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible

The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included

Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications

Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts

Fear the rain no more, have fun and stay dry with Specialized's Plug and Play Fender Set!

Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)

- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

Don't let the weather get in the way of winning. The new RockShox branded SID short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at two points and looks as if your fork and fender are one, leaving your competitors wondering why they are still messing around with zip ties. Features - 2-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with new SID Ultimate, SID Select+, and SID Select forks - Not compatible with SID SL

- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.